CygNet Measurement > FMS Explorer > Controls Menu > History Grid Control > Editable Data Items - Liquid

Editable Data Items - Liquid

Data items for liquid devices can be edited directly from the History Grid as indicated with check marks in the following table.

Note: Some data that cannot be edited directly (e.g. Data Source) can be updated in the grid as a result of edits performed on associated data or properties.

Data Item Column

Editable for Liquid Devices

 Description
Flow Rate Check Flow rate
Mass

Check

Mass

 

Note: Data-spreading calculation functionality can apply to this data item. See CygNet Measurement Data Calculation for more information.
Density Check Base density
Volume

Check

Volume

 

Note: Data-spreading calculation functionality can apply to this data item. See CygNet Measurement Data Calculation for more information.
GV Check Gross Volume (GV)
GSV Check Gross Standard Volume (GSV)
IV Check Indicated Volume (IV)
Meter Temperature Check Meter temperature
Meter Pressure Check Meter pressure
Flow Time

Check

Flow time

 

Note: Data-spreading calculation functionality can apply to this data item. See CygNet Measurement Data Calculation for more information.
Pulses

Check

Pulse count

 

Note: Data-spreading calculation functionality can apply to this data item. See CygNet Measurement Data Calculation for more information.
Pulses Begin Check Pulse count at the beginning of the record
Pulses End Check Pulse count at the end of the record
Energy

Check

Accumulated energy

 

Note: Data-spreading calculation functionality can apply to this data item. See CygNet Measurement Data Calculation for more information.
Density Temp Check Density temperature
Density Press Check Density pressure
Observed Density Check Observed density
Uncorrected Density Check Uncorrected density
Flow Mass Begin Check Flow mass - Begin
Flow Mass End Check Flow mass - End
IV Begin Check Indicated Volume (IV) - Begin
IV End Check Indicated Volume (IV) - End
GV Begin Check Gross Volume (GV) - Begin
GV End Check Gross Volume (GV) - End
GSV Begin Check Gross Standard Volume (GSV) - Begin
GSV End Check Gross Standard Volume (GSV) - End
NSV Check Net Standard Volume (NSV)
NSV Begin Check Net Standard Volume (NSV) - Begin
NSV End Check Net Standard Volume (NSV) - End
SW Vol Check Sediment and water volume
SW Vol Begin Check Sediment and water volume - Begin
SW Vol End Check Sediment and water volume - End
SW Percent Check Sediment and water percent
EVP Check Equilibrium Vapor Pressure
CTL Check Correction factor for temperature on liquids
CPL Check Correction factor for pressure on liquids
CTPL Check Correction factor for temperature and pressure on liquids
CCF Check Combined correction factor
DCF Check Density correction factor
Densitometer factor Check Densitometer correction factor
Meter factor Check Meter factor
K factor Mass Check K factor - Mass
Methane Check Methane (C1)
Ethane Check Ethane (C2)
Propane Check Propane (C3)
Isobutane Check Isobutane (isoC4)
n-Butane Check n-Butane (C4)
Isopentane Check Isopentane (isoC5)
n-Pentane Check n-Pentane (C5)
Neopentane Check Neopentane (neoC5)
n-Hexane Check n-Hexane (C6)
n-Heptane Check n-Heptane (C7)
n-Octane Check n-Octane (C8)
n-Nonane Check n-Nonane (C9)
n-Decane Check n-Decane (C10)
Nitrogen Check Nitrogen (N2)
Carbon Dioxide Check Carbon dioxide (CO2)
Water Check Water (H2O)
Hydrogen Sulfide Check Hydrogen sulfide (H2S)
Hydrogen Check Hydrogen (H2)
Carbon Monoxide Check Carbon monoxide (CO)
Oxygen Check Oxygen (O2)
Ethylene Check Ethylene (C2H4)
Propylene Check Propylene (C3H6)
Heating Value Volume Check Heating value - Volume
Heating Value Mass Check Heating value - Mass
Relative Density Check Relative density
Compressibility Check Compressibility
Viscosity Check Viscosity
CSW Check Sediment and water correction factor
K factor Volume Check K factor - Volume
Discharge Coefficient Check Discharge coefficient calculation method
Coriolis Drive Gain Check Coriolis drive gain
Observed Density in Relative Density Check Observed density - in relative density
Observed Density in API Degrees Check Observed density - in API degrees
Back to top

Let us know how we can improve this topic.

CygNet at weatherford.com

© 2020 Weatherford. All rights reserved.